Tiny Whoop FPV Gate

I wanted a cheap LED Tiny whoop gate and came up with this. You can make an LED gate for around £6-£8.

You will need:
- LED strip, for this i used 3528 but 5050's would work too example: https://banggood.com/5M-300-LEDs-SMD-3528-Flexible-LED-Strip-Light-Non-Waterproof-DC-12V-p-922277.html
- Clear PVC Food pipe 12ID 15OD about 1.3m per gate e.g. https://www.ebay.co.uk/itm/222789645286
- 25mm clear heat shrink 25cm x2 per gate
- 4x M3 20mm Screws
- 4x M3 nut
- Hot glue
- LED Driver, there’s many you can use but I like: https://banggood.com/24-Key-Mini-IR-Remote-Controller-For-3528-5050-RGB-LED-Strip-Light-DC-12V-p-976062.html

How to assemble:
Cut the LED's to length, I use 7 sections per gate (a section is between the two solder pads)
Cut the pipe to length about 1.3m is the right length if you wish to integrate the controller
Solder the controller to the LED strip, I solder the controller directly to the tape and then hot glue it to protect it
Feed the strip ligh