Tiny Whoop Gate Base - Easy Print

Easy Print Tiny Whoop Race Gates – USB Powered LED's.

First off full credit to David Just for the original design that I based the idea of this design from.

https://www.thingiverse.com/thing:3323922

Backstory:

The drive came from my good printer being out of service, so I was using my old PrinterBot Metal Plus to make his design and it was just a bit too rough. I also purchased the wrong size PVC and found that the print tolerances were just not good enough on my PrinterBot for the area of his design where the polyurethane tube goes in. I decided I wanted to make something on my own based on his idea of using PVC tubes as feet. So after a few hours in TinkerCAD I came up with a v1 design. The entire goal was to make it as quick and easy to print as possible using PLA while still being strong enough to take a hit from a TinyWhoop. After the v1 was printed and tested I found that it needed more zip ties. I also added a concave area on the top to give the polyurethane tub