Thingiverse
Tiny Whoop Hovercraft + Racing Edition V2
von J99works
191
Downloads
168
Likes
3
Makes
- Tiny whoop hovercraft racing edition
- Print with supports on build plate
- Made for 6.5mm motors and almost any battery
- To hold battery in place put rubber band ( Loomband )over stand for main board, it will press on battery
- Adjust height of bottom just by resizing Z dimension in slicer (Make it 9mm or more !)
- You will need 3x M2 screws (can't be longer than your bottom height + 1.7mm)
- Print with supports on build plate
- Made for 6.5mm motors and almost any battery
- To hold battery in place put rubber band ( Loomband )over stand for main board, it will press on battery
- Adjust height of bottom just by resizing Z dimension in slicer (Make it 9mm or more !)
- You will need 3x M2 screws (can't be longer than your bottom height + 1.7mm)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!