Tissue box

I printed it using a 0.6mm nozzle, a layer height of 0.4mm and a line width of 1.2mm, used the box and top separately and aligned in the same position (0,0), the box 1.2mm raised in Z and set 0 for the bottom and top layers and for the infill. If you print it this way then reduce the speed to keep the flow at an acceptable value.This design is inspired by this one by Devin Montes https://www.myminifactory.com/es/object/3d-print-tissue-cubes-facial-tissue-box-covers-or-regular-boxes-121272