TM-V7a sepearation cable

This is to make a separation cable for the Kenwood TM-V7a radio or other radios that use the DKF3C cable. To make, print, all 4 pieces. I prefer to use support material for the Body A piece. Request samples for Part numbers 836-22-004-10-001101, 830-10-004-10-003000 from https://www.mill-max.com/ for the pins that go inside.

When printed, wire the pins straight through. ie wire one side top to bottom wire 1, 2, 3, 4 and wire the other side the same way.

Put the pogo pins in the Body side, and put the flat pins in the head unit side. I used hot glue to secure the pins to the 3D printed housing. Then use super glue to secure part B to the top.