Toile paper holder quick release

I made a quick-release toilet paper holder that resembled the traditional spring-loaded one I already had assembled, it look great in my bathroom. The aesthetic is very simple, so it could fit in yours too. Printed in ASA, but PETG is also fine.I used ASA with a 0.2 layer, then sanded with 400g sandpaper and an 800g sponge to make the surface as smooth as possible. ASA can also be lightly sanded with acetone.I recommend printing it upside down to make it easier to release the flaps, which are printed all at once.Use 3 or more top and bottom walls to reduce the visibility of the infill patterns with the white filament. To fix the main part to the wall-mounted plate, I used an M.4 threaded insert and a countersunk screw.threaded inserts https://amzn.to/4pBbRU4countersunk screws https://amzn.to/4pBbRU4threaded insert welder https://amzn.to/4qgcN17on the wall use what you think is most appropriate based on the material it is made of If you have a friend who poops a lot, share this project