Thingiverse
Token Box: Locked Crate
por AD9000
52
Descargas
31
Likes
0
Makes
These tiny boxes are designed to hold gaming tokens while being able to fit in typical foam trays for transporting miniatures. They come in three sizes: 30x30x30mm, 30x30x50mm, and 30x30x70mm. The middle size should fit in a typical slot for 30mm base miniatures.
The outside is intended to look like shipping crates, to allow the boxes to pull double-duty as scatter terrain. The lock marks the front of the box.
The lids have small bumps that fit into small grooves in the body, to function as a rudimentary hinge/latch system. How well this works depends on your printer tolerances I suppose; some cleanup and/or sanding will likely be necessary for a good fit. Especially the curve at the back of the lid; this will most likely need a bit of sanding to allow the lid to open and close smoothly.
A little bit of force will be necessary to push the lid into place to start. The lid will likely not have enough tension keeping it closed to just throw in a bag or a pocket; the boxes are int
The outside is intended to look like shipping crates, to allow the boxes to pull double-duty as scatter terrain. The lock marks the front of the box.
The lids have small bumps that fit into small grooves in the body, to function as a rudimentary hinge/latch system. How well this works depends on your printer tolerances I suppose; some cleanup and/or sanding will likely be necessary for a good fit. Especially the curve at the back of the lid; this will most likely need a bit of sanding to allow the lid to open and close smoothly.
A little bit of force will be necessary to push the lid into place to start. The lid will likely not have enough tension keeping it closed to just throw in a bag or a pocket; the boxes are int
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!