Tolerance Test for Professionals

I print this every 1000 hours of print time to log printer mechanical parameters. We are not testing filament quality here, so use a filament that's easy and prints the best, I use Bambu PLA Matte or Basic. The X1C software does a good job of catching if you possibly have a loose axis belt, however, the pass/fail criteria are larger than what you want for good fitment. Print with:0.2mm layer HeightDefault Line width of 0.42mm2 wall loops (or whatever you usually print with)Tick the Detect thin walls checkboxNo skirt, no Brim, no support neededSet the speed to whatever you usually use All other settings you can fine-tune, but I don't recommend it, this is mainly for tuning mechanical components. How to run the test(follow along with the pictures uploaded above):(Optional) Measure cubes XYZ, I write the dimensions on the back of the card. I measure (X:9.96mm, Y:10.00mm, Z:10.00mm).Insert the cube with the tab facing -X, this checks if Z matches X, I write Z on the left side of the cutout