Tom Petty HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 250x250.73mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #943797 PLA+ SUNLU RED Transmission Distance: 3.7 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffb3 PLA+ SUNLU Yellow Transmission Distance: 3.9 #ffd8fe PLA GENERIC SKIN Transmission Distance: 5 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to RED At layer #12 (1.04mm) swap to Blue Gray At layer #14 (1.2mm) swap to Yellow At layer #18 (1.52mm) swap to SKIN At layer #21 (1.76mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.