Thingiverse
Tommy
par Rchatburn
64
Téléchargements
61
Likes
1
Makes
To Celebrate VE Day 75
DONATE
If you appreciate this model and want to show your support please do not tip me but consider a donation to the Royal British Legion and support their fantastic work.
https://www.britishlegion.org.uk/get-involved/ways-to-give/donate
MEASUREMENTS and SETTINGS
The model measures
X - 120.5mm
Y - 262mm
Z - 5mm
You can print this at a rough layer height 0.3mm and it is more important to have top and bottom layers for quality
Infill can be low to nothing as the bridging space is only 5mm so about 10% is fine if your printer is not able to bridge
The stand should be a tight fit, and the models tab may require a tiny bit of sanding if its not a perfect fit
DONATE
If you appreciate this model and want to show your support please do not tip me but consider a donation to the Royal British Legion and support their fantastic work.
https://www.britishlegion.org.uk/get-involved/ways-to-give/donate
MEASUREMENTS and SETTINGS
The model measures
X - 120.5mm
Y - 262mm
Z - 5mm
You can print this at a rough layer height 0.3mm and it is more important to have top and bottom layers for quality
Infill can be low to nothing as the bridging space is only 5mm so about 10% is fine if your printer is not able to bridge
The stand should be a tight fit, and the models tab may require a tiny bit of sanding if its not a perfect fit
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !