Slicer Discord
Tomos D6 Prototype – 3D printable model from GrabCAD GrabCAD
SOLIDWORKS, STEP / IGES

Tomos D6 Prototype

188 Downloads
27 Likes
0 Makes
Go to Model
My project about prototype of replica Tomos D6 with water cooled cylinder. Spark plug and other stuff is possible to change... Also you will need a strong pipe for these setup. One of big names in the 50cc history is Jugoslavian Tomos. TOMOS: Tovarna Motora Sezana was named after the first factory/ manufacturer placed in the village of Sezana (Slowenien)built after 1945, but because of an unsettled borderline against Italy, man fürchtete dass auch Kopar (oder slowenisch Koper) zu Italien kommen kann. Aber, als sich Tito nach 1948 zum Westen orientierte, wurde die Grenze mit Italien 1953 definitiv geregelt. So wurde 1954 entschieden, TOMOS nach Kopar zu übersiedeln (wegen besserer Lage und grossem Hafen, geeignet für Exporte)......... Tomos participated in the first season (euro-cup 61), taking a win at Hockenheim. From then on an evolution of 50cc racebikes, all designated D = dirkalni (racer), made a strong presence in both national and international championships. Useful link http://mopedtuning.raconsulting.nu If you need something, contact me on [email protected]
Category
SOLIDWORKS, STEP / IGES
Source
GrabCAD
Published
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STEP, STL
Material
PLA, HIPS
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection