Thingiverse
Tool holder for Flashforge Creator Pro/Pro 2
von andreagattonero
2
Downloads
1
Likes
0
Makes
Was a work in progress: a tool holder for the Flashforge Creator Pro and Pro 2.
Hold the Allen keys, tweezers, the scraper and a small flashlight.
But I've now acquired a Creator 3 so will sell the Pro2 and have no use anymore for this tool holder, yet I'll leave it here in case someone finds it useful or wants to make a remix to sort out a couple of flaws (and perhaps make it so that doesn't need 10+ hrs print).
There's a one-piece version that needs a build capacity of 294mm, some printers may cope by printing it 45º across the build plate.
If your printer has a smaller capacity, then it needs to be printed in two parts.
It's held onto the side (right hand, or the left hand as well) with the original M4 bolts, but you'd better replace them with slightly longer 14mm ones.
Hold the Allen keys, tweezers, the scraper and a small flashlight.
But I've now acquired a Creator 3 so will sell the Pro2 and have no use anymore for this tool holder, yet I'll leave it here in case someone finds it useful or wants to make a remix to sort out a couple of flaws (and perhaps make it so that doesn't need 10+ hrs print).
There's a one-piece version that needs a build capacity of 294mm, some printers may cope by printing it 45º across the build plate.
If your printer has a smaller capacity, then it needs to be printed in two parts.
It's held onto the side (right hand, or the left hand as well) with the original M4 bolts, but you'd better replace them with slightly longer 14mm ones.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!