Tool Organizer

Additional Very Big Boxes: https://www.thingiverse.com/thing:4853906

I Used parameters for body parts: Layer Heigt 0.2 mm. Nozzle 0.5 mm. Wall Line Count 6, Infill 10%, Print Speed 40mm/s.

Body Parts: Orgonizer-01.stl, Orgonizer-02.stl, Orgonizer-03.stl - PETG (I Used White, because there was a lot of materia). Very big parts, but without support (max part 300x155x72mm).

BoxBig.stl - PETG. Without support.
BoxBig_CapLinesBase.stl - dark/black PETG. Simple Flat part.
BoxBig_CapLines.stl - yellow ABS. Simple Flat part.
BoxBig_CapSimple_Alternative.stl - This is only an option if you do not have different colors. You can definitely print yellow and black stripes? If you need a simple boring surface. No need stripes. Just a tablet and a hand. No need BoxBig_CapLinesBase.stl nad BoxBig_CapLines.stl in this case !!!!


BoxSmall.stl - PETG. Without support.
BoxSmall_SimpleCap.stl - yellow ABS. Simple Flat part.

Hand.stl - I used ABS, also you need four M2x8mm bolts and nuts