Toolbox Ender 5

Toobox which fits on Ender 5 (Pro) the max buildvolume has been taken in account, so your bed will not hit the top of the box. Inside measurements of toolbox: approx 100x220x35 mm. It's also compatible with the bed supports, which I downloaded from thingiverse and installed on my printer, see attached pictures. By using caps who slide in, the box can be opened when the bed is in lowest position.

I printed the caps out of PETG for flexibility. The box I printed with PLA.
Supports may needed for the vertical holes and the horizontal sleeves in the box. I recommend using supports "everywhere". You may need to change buildplate volume in X-Y to 230mm in Cura, or use the creality slicer, when printing the top cap.

I mounted the box with two M5x30 mm bolts onto the ender frame with 2 T-nuts in the frame. On the back side of the control unit, there are vent holes where M3 bolts just fits in. So in the toolbox I made slots where this M3 bolts fits in if you want a better mount, but isn'