Thingiverse
Toolhead Voron V0
door 3rdeyelabs
8
Downloads
5
Likes
0
Makes
Tool Head modification for Voron
The modifications are to replace the pushfit ECAS connector with a PC4-M10 Male Straight Pneumatic Tube Push Fitting Connector for Voron V0 ( V6 Threaded hotend)
3D Printer Slicer Setting:
1. Infill: 40%
2. Infill Pattern: Grid, Gyroid, Honeycomb, Triangle or Cubic
3. Layer Height: 0.2 mm
4. Extrusion Width: Forced 0.4 mm
5. Wall Count: Minimum 4
6. Solid Top/Bottom Layers: Minimum 5
For Installation guide follow as per the guidelines given in Voron V0.0 manual.
No extra modification is required on the Voron.
https://3rdeyelabs.io
The modifications are to replace the pushfit ECAS connector with a PC4-M10 Male Straight Pneumatic Tube Push Fitting Connector for Voron V0 ( V6 Threaded hotend)
3D Printer Slicer Setting:
1. Infill: 40%
2. Infill Pattern: Grid, Gyroid, Honeycomb, Triangle or Cubic
3. Layer Height: 0.2 mm
4. Extrusion Width: Forced 0.4 mm
5. Wall Count: Minimum 4
6. Solid Top/Bottom Layers: Minimum 5
For Installation guide follow as per the guidelines given in Voron V0.0 manual.
No extra modification is required on the Voron.
https://3rdeyelabs.io
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
