Tools holder

I present to you a system I developed for organizing tools adapted to P1S and X1C printers. Easy form of installation allowing for assembly without physical damage to the printer. Assembly instructions:After printing remove the supports and then connect elements together based on the gif below. 2. Install the assembled block on the side of the printer. Slide the lower mounts under the printer body. 3. Insert the upper mounts under the AMS legs. To protect the glass surface of the printer, insert e.g. 1mm thick rubber between the plastic element and the glass. In my case, I used a piece of silicone drawer mat.4. Place spacers under the two remaining AMS legs.5. Install hooks.