Thingiverse
Toothbrush Cup
di SocialEgli
1
Download
0
Likes
0
Makes
I designed this toothbrush cup because the original glass broke.
The cup has an diameter of 54 mm and is 70 mm high in total. The inner diameter of the cup is 51 mm. The cup has a hole at the bottom for residual water.
Support is not mandatory because the overhanging edge is on the holder and printing errors due to overhang are not visible.
Dimension:
51 mm inner diameter
54 mm smaller, lower diameter for support
60 mm larger, upper diameter
70 mm total height
The cup has an diameter of 54 mm and is 70 mm high in total. The inner diameter of the cup is 51 mm. The cup has a hole at the bottom for residual water.
Support is not mandatory because the overhanging edge is on the holder and printing errors due to overhang are not visible.
Dimension:
51 mm inner diameter
54 mm smaller, lower diameter for support
60 mm larger, upper diameter
70 mm total height
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
