Toothless Hueforge

Project: Toothless.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.88mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.64mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.2 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 6 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #22 (1.84mm) swap to Cyan At layer #25 (2.08mm) swap to Jade White for the rest. For only one AMS, start with 4 colors as follows,Slot1: BlackSlot2: BlueSlot3: RedSlo