Thingiverse
Toradora! Logo
door dilo8976
0
Downloads
0
Likes
0
Makes
Create your own Toradora logo!
Each circle outline is designed to have a 1.5inch diameter. Each piece is separated by color to match the logo. These pieces were designed for a single-color extruder and thus the outlines and letters are intended to be printed separately.
Letters can be printed all at once, with white filament recommended. Also, a brim is recommended for the letters to help them stick to the print bed better since they are pretty thin. Note that the first and second “r”s are different sizes. The letters are designed with a slight offset from their outlines so they should slide easily in the outlines, but should be relatively snug. Glue as needed to secure them in place. I used these as wall decorations and just used double sided tape on the back and they hold just fine without glue.
Each circle outline is designed to have a 1.5inch diameter. Each piece is separated by color to match the logo. These pieces were designed for a single-color extruder and thus the outlines and letters are intended to be printed separately.
Letters can be printed all at once, with white filament recommended. Also, a brim is recommended for the letters to help them stick to the print bed better since they are pretty thin. Note that the first and second “r”s are different sizes. The letters are designed with a slight offset from their outlines so they should slide easily in the outlines, but should be relatively snug. Glue as needed to secure them in place. I used these as wall decorations and just used double sided tape on the back and they hold just fine without glue.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
