Torii Gate Soap Dish

Enjoy this easy to print soap dish!

Torii are Shinto gates marking the entrance to their shrines. Very pretty and iconic to Japan. There are many types of torii, not only red.

The model is displayed with a “Dove” soap bar, might want to scale the model up 10-20%. The bottom part has an angle, so the soapy water can drain through the cutout.

### Instructions

The model prints in 4 parts -

* P1 x 2
* P2 x 1
* P3 x 1

The top part should print with no supports at all, may need to cut some material from the connector pins after the print though. The fit is pretty snug, so it's not an issue. The P1 parts are designed to press-fit into the base, so applying a little bit of force may be necessary.

P3 requires *“Make overhangs printable”* because the slicer **slices them as overhangs by default for some reason.** I highly recommend using the **included OrcaSlicer .3mf file.**

### Update 26.6.25
- Due to popular demand I've reworked the P3 model to be **easily printable** and also exten