Tormach Jog Controller Handle

Job Controller Handle

This is a handle designed for the Tormach CNC Jog Shuttle Controller. It's ergonomic design and magnetic base add versatility to the controller.

After using the Tormach controller, I found it to be very light weight and a little difficult to hold. This lead to an accidental button press every once in a while, or jogging a liiiiittle too far. So I designed this handle.

It is easy to hold in one hand, and the added weight just feels right.

I originally designed it to include a bar of aluminum in the handle. This is to balance the controller in your hand, and really makes it feel like you're holding a piece of machinery. However I did include an STL of the handle without the pocket for the aluminum.

**Required hardware:**
2x - M3 60mm Socket Head Cap Screw https://www.mcmaster.com/91290A181/
2x - M3 Threaded Insert https://www.mcmaster.com/94459A140/
7x - Magnets https://www.mcmaster.com/5848K12/

**Bolt required to secure weight inside handle:*