Torso Spiderman

Project: SPIDER.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100.11x219.75mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #3 (0.32mm) swap to Blue Gray At layer #8 (0.72mm) swap to Orange At layer #12 (1.04mm) swap to Yellow for the rest.