Toshiro Bleach Hueforge

Project: Toshiro.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 117x234mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.08mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Basic Black Transmission Distance: 0.1 #0086d6 * PLA BambuLab Basic Cyan Transmission Distance: 2.4 #6a89a7 * PLA 3DHoJor Blue Grey Transmission Distance: 2.3 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Cyan At layer #12 (1.04mm) swap to Blue Grey At layer #18 (1.52mm) swap to Jade White for the rest.