Totoro Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 57x150.16mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.5mm and the Actual Depth is 1.6mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Generic multi Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Ma