Totoro - Bookmark

Grayscale of Totoro holding a giant green leaf as an umbrella shielding Mei and Mid Totoro from the rain. Their reflections are clearly visible in the puddle. I printed this in an 0.4mm Nozzle. The details of Mei and Mid Totoro, so as the rain, would be better represented in an 0.2mm Nozzle. Totoro Rain BookmarkCan be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 50x160mm printed. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Bambu Green Transmission Dist