Totoro hueforge

SALE PROHIBITED — For commercial licensing inquiries, please contact me.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x282.13mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Ice Blue At layer #15 (1.28mm) swap to Silver At layer #21 (1.76mm) swap to White for the rest.