Toulouse Stadium

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to RedBorder Only Colors from here until the end. At layer #24 (2mm) swap to BlackThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #44 (3.6mm) swap to White for the rest.