Thingiverse
Tour Eiffel
von CRIK
153
Downloads
187
Likes
0
Makes
Eiffel Tower is based on a very detailed model from RegusTtef (http://www.blendswap.com/blends/view/74989) and has been modified to make it printable
All *.stl files have been prepared with Blender and are ready to print for bed sizes starting at 190mm x/y
Works great for part scale 500% to reach overall height of 85cm - small scale could lead to issues as the model includes lots of fine structures which would get suppressed automatically in your G-code generator
Overall 11 different parts - however lower section S1 defines only a quarter as things get pretty large down there.
And you will need between 1-1.5kg of PLA for this job
All *.stl files have been prepared with Blender and are ready to print for bed sizes starting at 190mm x/y
Works great for part scale 500% to reach overall height of 85cm - small scale could lead to issues as the model includes lots of fine structures which would get suppressed automatically in your G-code generator
Overall 11 different parts - however lower section S1 defines only a quarter as things get pretty large down there.
And you will need between 1-1.5kg of PLA for this job
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
