Towards Thermopylae

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Smart_Recycled Gris_Oscuro Transmission Distance: 0.1 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Gris_Oscuro At layer #9 (0.8mm) swap to Jade White At layer #16 (1.36mm) swap to Black At layer #19 (1.6mm) swap to Red At layer #26 (2.16mm) swap to Jade White for the rest. Imprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mm El modelo tiene un tamaño de 200x200 mm. Filamentos utilizados: PLA BambuLab Basic Negro Distancia de transmisión: 0,6 PLA Smart_Recycled Grey_Dark Distancia de transmisión: 0,1 PLA BambuLab Basic Jade Blanco Distancia de transmisión: 5 PLA BambuLab Basic Rojo Distancia de transmisión: 4 Esta impresi