TPU tiny whoop frame

They said it couldn't be done but here it is - a tinywhoop frame that works with TPU. Works with 0603/0703/0803 motors, and has a battery compartment suitable for the betafpv 1S 11mm wide battery. Takes up to 31mm props.

Does not require supports - but print upside-down. You will get some stringy things - but I clenaed those up by using some hot air (200C) from a rework station and just pushing or squeezing into place. Also - you may need to trim the motor shaft holes - if the shaft can't move freely the motors won't work.

This is not really a beginner project - because of the cleanup on the frame I'd say this is for advanced makers who can solve the little problems to get it working.