Thingiverse
Tractor Steering Wheel
por greenogre
8
Descargas
9
Likes
0
Makes
The dog ate my steering wheel!
========================
The dog chewed the steering wheel on our grandson's Peg Perego "John Deere" pedal tractor. A couple of evenings with OpenSCAD and here's a replacement.
Now, if I can only find a way to make the rest of the tractor look new!
Printed in PETG (this toy lives outdoors). It is an easy print but does require supports for the hub. Make sure you have plenty filament on the spool, it uses around 75m of 1.75mm filament.
The steering wheel is 185mm in diameter so it should fit a 200x200mm build plate.
10% infill with 3 perimeters and 3 top/bottom layers (at 0.3mm layer height). Perhaps use 4 of each if printing at 0.2
OpenSCAD source is included. (My style isn't the prettiest but it get's the job done!)
========================
The dog chewed the steering wheel on our grandson's Peg Perego "John Deere" pedal tractor. A couple of evenings with OpenSCAD and here's a replacement.
Now, if I can only find a way to make the rest of the tractor look new!
Printed in PETG (this toy lives outdoors). It is an easy print but does require supports for the hub. Make sure you have plenty filament on the spool, it uses around 75m of 1.75mm filament.
The steering wheel is 185mm in diameter so it should fit a 200x200mm build plate.
10% infill with 3 perimeters and 3 top/bottom layers (at 0.3mm layer height). Perhaps use 4 of each if printing at 0.2
OpenSCAD source is included. (My style isn't the prettiest but it get's the job done!)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
