traffic cone, colapsable

collapsible traffic cone. two sizes 175mm base for an A1 mini and 240mm base for X1C and P1Pthe size is:Cone 1base: 240 x 240, (9.4in)Collapsed 116 tall (4.57in)expanded 440mm tall (17.3in) approximately Cone 1 175base: 175mm x 175mm, (6.9in)Collapsed 100 tall (4in)expanded 400mm tall (16in) approximately The photos show the 240mm size. You can see the size with the soda can, or tire. because of the gap layer between the parts. this would not change scale much. When printing The slicer might warn you that there are “floating objects”. This is from a gap layer between parts.Depending on your specific filaments and slicer settings the floating objects might be a problem. Just like the first layer it would be good to observe this. With the current setting it is layer 16 and 17. Layer 16 (first layer above the gap) might look a little different, but layer 17 should look normal or close to normal. Some modifications you might make:Change the filament for part as I did in the print. Giving i