Traffic sign 18+

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3mm and the Actual Depth is 3.2mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 4.2 PLA BambuLab Matte Charcoal Transmission Distance: 0.6This print uses 2 unique filamentsBoost Mefeel free to boost me :DSwap Instructions: Start with Jade White At layer #13 (2.56mm) swap to Charcoal for the rest.