Thingiverse
Train for Rainbow blocks
par Michal_G
6
Téléchargements
2
Likes
0
Makes
This is a train for rainbow blocks. AFAIK there are two main sizes of the block, larger ones with length of 140mm and smaller ones with length of 100mm.
I make a model for both of them, but print-tested only for the larger one. The tolerances are generous and all edges are chamfered for comfortable handling during play.
There is also and SCAD file for customization.
Additional material: per train wagon:
4x M8 washers
4x M4 wide washer (DIN 9021)
4x M4x8 screws
I recommend to print the main body with brim AND support to have good adhesion of the sticking out parts
I make a model for both of them, but print-tested only for the larger one. The tolerances are generous and all edges are chamfered for comfortable handling during play.
There is also and SCAD file for customization.
Additional material: per train wagon:
4x M8 washers
4x M4 wide washer (DIN 9021)
4x M4x8 screws
I recommend to print the main body with brim AND support to have good adhesion of the sticking out parts
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
