train

by c.c.c.

10 Downloads

3 Likes

2 Makes

Download Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 136.61x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #13 (1.1