Tranquility Hueforge

I made this originally as bookmarks, but was requested to do a regular hueforge for it. Project: tranquility.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Red Transmission Distance: 4.2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Po