Thingiverse

TransTEC FROG GoPro Session mount

by Airflo

21 Downloads

18 Likes

1 Makes

Hello, fellow FROG user and FPV enthusiast !
Here you'll find everything you need to make your beloved froggy frame The Ultimate freestyle frame. This GoPro mount is installed on the top plate of the frame, using the 2 carbon fiber bars provided in the kit, and 4xM2.5 screws for clamping (also provided in the kit). Provided formats are GoPro Session and GoPro Hero (5,6,7). Provided tilt angles are 30°(not tested yet), 35°, 45°, 55°, 60°, 65°. If you need me to add this feature on other tilt angles, just ask. This GoPro mount is lightweight and very durable: I fly on 5S with 65 deg camera tilt, I already broke dozens of frames and neither the GoPro nor the mount came off/broke.

You'll also find some capacitor holder designs, one for a single 1000uF-35V cap, and the other for 2x330uF-35V cap. This is very convenient when you want to add filtering caps on the main power source. Add a short length of 20AWG power leads from the PDB power pads to the caps, and mount the cap holder on the

Antenna holder cap Capacitor dipole dipole antenna fpv FPV Antenna fpv camera mount FPV freestyle fpv racer GoPro GoPro Mount gopro session gopro session mount mattystuntz miniquad Protection quad Quadcopter session Antenna holder cap Capacitor dipole dipole antenna fpv FPV Antenna fpv camera mount FPV freestyle fpv racer GoPro GoPro Mount gopro session gopro session mount mattystuntz miniquad Protection quad Quadcopter session

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format