Thingiverse
Trash bin Octo Square polygon shape
11
Download
5
Likes
0
Makes
Trash bin design I made on SolidWorks.
Uses all of the print bed volume on the Anycubic Mega S. Trash bin_v2_220mm was printed on the Mega X for more capacity.
Can be printed in vase mode with a 0.6 mm nozzle and 130% wall flow, although I do not recommend it, has very low resistance and layers come apart after a few accidental kicks.
Works much better if printed with 2 walls and 0.6 mm nozzle or 3 walls and 0.4 mm nozzle.
SolidWorks files included and .3mf file with all print settings for Anycubic Mega S on Cura.
Uses all of the print bed volume on the Anycubic Mega S. Trash bin_v2_220mm was printed on the Mega X for more capacity.
Can be printed in vase mode with a 0.6 mm nozzle and 130% wall flow, although I do not recommend it, has very low resistance and layers come apart after a few accidental kicks.
Works much better if printed with 2 walls and 0.6 mm nozzle or 3 walls and 0.4 mm nozzle.
SolidWorks files included and .3mf file with all print settings for Anycubic Mega S on Cura.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!