Treasure Chest [Kit Version]

A handy little treasure chest perfect for storing away your secret horde.This is a quick and easy self assembly kit that does not require supports, glue or multicolour printing!If you would like a simpler/multicolour version check out my other models.✅ No supports✅ Easy assembly✅ No glue required✅ No multicolour required✅ Fits on standard 220x220mm build plate (x2)ASSEMBLY GUIDE:1) To print load the following 2 files into your slicer:METAL FULL SET - (print in PLA silk gold/silver filament)WOOD FULL SET - (print in PLA brown or PLA wood filament)2) Following the pictures shown in the description...3) Assemble the base:Align the wooden base part with the hole for the lock at the front & snap the lock part into place.Use the alignment tabs to orient the outer cage with the tabs on the opposite side to the lock.Inset the wooden base into the cage.Snap on the top portion of the cage with the hinges aligned with the tabs at the back.4) Assemble the lid:Place the wooden part of the lid onto the upper cage ring so that the back parts mesh together.Take the two metal end parts and snap them onto each end with the tabs facing the back.The two inner metal parts should now clip into the central grooves with the tabs facing the back.5) Connect the lid to the base:Align the lid with the base and slot each of in the two clips (outside in) using the provided tool.6) Enjoy your mini treasure chest!7) Bonus - Disassembly:A handy tool has been included to allow easy removal of the pins connecting the lid and base sections.It is highly recommended that you do not attempt to disassemble lid or base sections since the snap pins can break if forced apart.Additional components:I have also included all of the individual parts allowing them to be printed easily for testing/replacements.Easy print settings:-Minimum print time* (metal parts) ~2h 54min(wood parts) ~3h 7min-Wall loops 2-3-Infill 15%-Support N/A-Brim Optional (do not use on pins!)*Times estimated for high speed printers such