Treasure Chest [Multicolour Version]

A handy little treasure chest perfect for storing away your secret horde. (Dice not included)Please note this is a simplifiedmulticolour onlyversion. For single colour printers please see my other models for the kit version.✅ No supports ✅ Easy assembly ✅ No glue required ❎ No multicolour requiredASSEMBLY GUIDE: 1) To print load the file PART SET into your slicer.2) Paint using your slicer's tools or simply print using a single colour3) Connect the lid to the base:Align the lid with the base and slot each of in the two clips (outside in) using the provided tool. 4) Enjoy your mini treasure chest! 5) Bonus - Disassembly: A handy tool has been included to allow easy removal of the pins connecting the lid and base sections.Additional components: I have also included all of the individual parts allowing them to be printed easily for testing/replacements. Easy print settings: -Minimum print time* ~13h-Wall loops 2-3 -Infill 15% -Support None-Brim Optional (do not use on pins!) *Times estimated for high speed printers such as: K1, K1max, X1C, p1s etc. For additional settings see below: Dimensions: Length - 129mm Width - 80mm Height - 88mm (closed) Additional settings: -Filament usage (metal parts) 139g (wood parts) 128g (267g total)-Layer height 0.2mm -Detect thin wall No -Filaments used in demo esun pla+ (brown) CC3D Silk pla (gold) Maker's comments: This is a simplified version of the chest kit for multicolour printing and only has 4 parts (5 including pin insert/remove tool). All parameters are the same as the kit however, the model is a bit more sturdy and joins are somewhat cleaner.Any questions/suggestions? Please comment down below and I'll be happy to help in any way I can.