Triangle Fidget Toy

A simple and easy-to-print sliding fidget toy with magnets. This toy contains three seperate parts printed on a single plate. Add the eight magnets into the corresponding holes. This should be a tight fit, so no glue is required. If you want to be safe, you can add glue. There are three versions: 4x2mm magnet, 6x2mm and 8x3mm magnets. Be careful to put the magnets in with the right polarity. The easiest way for me to put the magents in correctly is to add the magnets to the middle part first. I stack another magnet on top of the magnet in the hole and then I press the middle part in the bottom part. Repeat this step for all the bottom magnets. For the top part you can do this as well. When all magnets are in place you can start sliding the pieces from one corner to another. Feel free to contact me if you have any problems with the print or the design. Happy sliding and fidgeting :)