Tribal Dragon Lightforge V2

Another tribal dragon lightforge design. Lightforge uses a thin layer of white instead of the standard black found in most Hueforge, allowing light to shine through.Colors will appear deeper and darker when illuminated. The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Jade White At layer #12 (1.04mm) swap to Yellow At layer #18 (1.52mm) swap to Pink At layer #20 (1.68mm) swap to Red for the rest.