Thingiverse
Trigorilla pro schematics and reverse engineering
door gerryc89
58
Downloads
44
Likes
0
Makes
Anycubic Trigorilla pro specs and mcu pinout
- 32bit Cortex-M3 MCU (STM32F103ZET6) 8MHz crystal
- Soldered 5x A4988 stepper drivers configured to 16 microsteps (MS all to 3v3)
- WIFI slot for ESP-01S
- Onboard Winbond W25Q16JV 16Mbit SPI Flash
- Onboard 24C16 I2C 16Kbit EEPROM
- 1F SuperCapacitor for blackout data backup with a mosfet for pwm charge
- Onboard SD Card slot and pin header
- USB Serial communication
- Buzzer, sw controlled internal led
- Second Extruder-Hotend DaughterBoard predisposition
- Mounted in Anycubic Predator, I3 Mega and ecc
- Custom touch lcd 3.5 inch 320x480 ILI9488 with TSC2046 spi touch controller
- can be flashed with st flash loader demonstrator 2.6.0 changing jumpers
I have recostructed the schematics of this board from my predator, i hope that
in some time is possible to implement a custom firmware for this board without
change it. The schematics is designed with eagle cad free and is for only for
study purpose, only the foundamen
- 32bit Cortex-M3 MCU (STM32F103ZET6) 8MHz crystal
- Soldered 5x A4988 stepper drivers configured to 16 microsteps (MS all to 3v3)
- WIFI slot for ESP-01S
- Onboard Winbond W25Q16JV 16Mbit SPI Flash
- Onboard 24C16 I2C 16Kbit EEPROM
- 1F SuperCapacitor for blackout data backup with a mosfet for pwm charge
- Onboard SD Card slot and pin header
- USB Serial communication
- Buzzer, sw controlled internal led
- Second Extruder-Hotend DaughterBoard predisposition
- Mounted in Anycubic Predator, I3 Mega and ecc
- Custom touch lcd 3.5 inch 320x480 ILI9488 with TSC2046 spi touch controller
- can be flashed with st flash loader demonstrator 2.6.0 changing jumpers
I have recostructed the schematics of this board from my predator, i hope that
in some time is possible to implement a custom firmware for this board without
change it. The schematics is designed with eagle cad free and is for only for
study purpose, only the foundamen
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
