Trinus E3Dv6 (Bowden) Precision Piezo
by ukflyer
17
Downloads
10
Likes
0
Makes
This is the first public version of my Trinus print head using an E3Dv6 (Bowden) with integrated [Precision Piezo](http://www.precisionpiezo.co.uk/ "Precision Piezo") Z probe.
The design (style) has been based on the Ormerod E3D Precision piezo by Dignitate but due to the strange layout and offset of the Trinus print head. I started this design from scratch.
There are four parts to the design
* Back plate - designed to sit in the standard Trinus metal plate
* Hotend and Universal PCB mount - two separate pieces
Hotend mount - the E3Dv6 universal heatsink slides into the slot beneath the piezo dome
Universal PCB mount - this slides into the same slot as the universal heatsink and provides a solid 360 degree support for the heatsink. The PCB mount is held in place by two M3 screws
* 27mm piezo mount - to support the piezo disc when sandwiched between the back plate and hotend mount
I used M3 button head hardware and I have tapped all the holes in the Hotend
The design (style) has been based on the Ormerod E3D Precision piezo by Dignitate but due to the strange layout and offset of the Trinus print head. I started this design from scratch.
There are four parts to the design
* Back plate - designed to sit in the standard Trinus metal plate
* Hotend and Universal PCB mount - two separate pieces
Hotend mount - the E3Dv6 universal heatsink slides into the slot beneath the piezo dome
Universal PCB mount - this slides into the same slot as the universal heatsink and provides a solid 360 degree support for the heatsink. The PCB mount is held in place by two M3 screws
* 27mm piezo mount - to support the piezo disc when sandwiched between the back plate and hotend mount
I used M3 button head hardware and I have tapped all the holes in the Hotend
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!