Thingiverse
Tripod for halogen
di Indianin666
72
Download
49
Likes
0
Makes
Tripod for my two 10W LED lamps.
I used old aluminum ski poles and 20mm diameter aluminum pipe for this project. The poles have a diameter of 16mm.
The elements are connected with M5 screws.
Lamps were attached to an aluminum profile, which I used in the construction of the light pad: https://www.thingiverse.com/thing:4062120
The profile has a dimension of 28x18mm
At the bottom of the tripod is a 12V power supply socket, and the electric wires are in the 20mm pipe.
I used old aluminum ski poles and 20mm diameter aluminum pipe for this project. The poles have a diameter of 16mm.
The elements are connected with M5 screws.
Lamps were attached to an aluminum profile, which I used in the construction of the light pad: https://www.thingiverse.com/thing:4062120
The profile has a dimension of 28x18mm
At the bottom of the tripod is a 12V power supply socket, and the electric wires are in the 20mm pipe.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
