Trippevals stick

I got sick of our Trippevals curtains from IKEA (https://www.ikea.com/se/sv/p/trippevals-moerklaeggande-plissegardin-ljusgra-50336892/). There is a quite big gap between wall/window and the curtain making the sun flow thru.

The idea is that you print one of the modells (1 arm or 2 arm). You mount the lite knob to the wall. You then snap the stick in place. This makes the curtain come close to the wall. There are two models that could be used. For some its enough with one 2 arm at the top and nothing more. For others they want more sticks down the window to make it really thight.

Sometimes it can be hard to snap it on/off. I suggest a screw driver from the inside the stick that makes it simpler.

A small screw for the knob.The know has a really tight fit. Can be printed with smaller % around 95% to make it a bit looser fit if you want to take it on off. Issue can occur that if its to loose that it wont be as thight.

I Print mine at hight speed 70 mm/s with 0.2 line hight a