Trium3D enclosure mount

Beware, it's still a work in progress! I won't be able to try all parts now, but should fit nicely.
I had to think about a way to safely block access to hot and moving parts! Should also work to have a temperature controlled environment.

The hinges should be mounted on the frame, the same way as the top and bottom part: 1xM6x10mm screw and nut.

For the opening panels, the lock bar should be mounted with 2xM6 nut and bolts, while the rotating part should be mounted on the panel (M4 bolts).

If you want to have a fixed panel, just mount the bracket with 2xM6 nuts and bolts on the frame, and then on the panel (M4 bolts).

The other parts should be mounted on a polycarbonate panel, with the following dimensions: 29x75cm, 1/1,5 mm thickness (WARNING: check dimensions on all sides of your printer, as they may slighty vary beacuse of assembly: gap between the beams, and from the bed to the top parts of the frame). Thicker panels might be unable to close fully.