Thingiverse
TronXY X3 Table Fitting.
di lexa1203
52
Download
38
Likes
1
Makes
TronXY X3 Table Fitting.
Table must be regulate approximately every ten hours of work. I offer this solution for easy regulation.
Addition parts:
1. 6 nut M5 S8.
2. 6 screws M5x20.
Assembly:
1. Install rollers to swings using regular spacers.
2. Install swings to fitting.
Installation:
1. Install conductor at existing holes in the table.
2. Drill two holes dia 5 through conductor.
3. Remove conductor.
4. Install fitting.
Note: "TronXY_X3_Table_FTG_RHS" using for replace regular spacers.
Table must be regulate approximately every ten hours of work. I offer this solution for easy regulation.
Addition parts:
1. 6 nut M5 S8.
2. 6 screws M5x20.
Assembly:
1. Install rollers to swings using regular spacers.
2. Install swings to fitting.
Installation:
1. Install conductor at existing holes in the table.
2. Drill two holes dia 5 through conductor.
3. Remove conductor.
4. Install fitting.
Note: "TronXY_X3_Table_FTG_RHS" using for replace regular spacers.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
