Tronxy X5SA Layer Resolution Test Objects

[Tronxy's data sheet for the X5SA](https://www.tronxy.com/product/x5sa-fdm-3d-printer/#tab-additional_information) states
**Layer Resolution 0.1mm-0.3mm**

If you want to check what you can actually get when using a smaller layer height in your slicer then some *test objects* may be helpful.

I designed these two objects for testing different layer resolutions:
- *Inclined Planes*
- *Ball Cap*

Both have XY-dimensions of about 40x40mm and Z-height of 1.3 resp. 2mm.

Please see my makes for results.
Please post your makes for comparison and discussion.
Thanks.

The 1st pictures shows prints with 0.025 / 0.05 / 0.1 mm layer heights for comparison.