Thingiverse
TRRS/AUX Extender Mount
di 64n3
11
Download
11
Likes
0
Makes
Before anything else: I will use AUX to name the connector, knowing very well that calling it AUX is not perfectly correct, but a prevalent name for the connector.
The provided .stl file fits a AUX connector with a diameter of 8mm and a length of 28mm. If you wish/need to change this mount, download the opensource software OpenSCAD and open the .scad file. In the instructions.txt you can find instructions to adapt the .scad code to suit your your needs. After that simply render it (press F6) and export as an .stl file.
I printed this in one go (both parts are in one .stl), with supports after 60° (or 65, I do not remember exactly) for the arc.
I'll gladly help out if you need further help adapting (or else, I guess)!
The provided .stl file fits a AUX connector with a diameter of 8mm and a length of 28mm. If you wish/need to change this mount, download the opensource software OpenSCAD and open the .scad file. In the instructions.txt you can find instructions to adapt the .scad code to suit your your needs. After that simply render it (press F6) and export as an .stl file.
I printed this in one go (both parts are in one .stl), with supports after 60° (or 65, I do not remember exactly) for the arc.
I'll gladly help out if you need further help adapting (or else, I guess)!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
